skip to main content
Welcome to STRAKON : What's new in Version 2025
What's new in Version 2025
New features, changes and enhancements to the current release
See here:
Important Information about Version 2025
Database Jump to Version 2025
The STRAKON 2025 version features a database jump for several important STRAKON data (drawings, Flex-Parts/3D
embedded parts, etc.). This means that these data are stored after being read in or Edits in STRAKON 2025 are no longer compatible with STRAKON <2025. If you are working on projects with multiple users, please consider whether you should finish the project in the previous version of STRAKON or directly update all STRAKON calculators with STRAKON 2025. This then also applies to the data transfer to external STRAKON suppliers.
Configurations
Settings
*Drawing Schedule Templates
For the Reinforcement chapter, you can select a list template for the new schedule "Mesh bending list individual", see Drawing Schedule Templates:
DICAD_Mesh-Bending.xml
 
*3D Design
Different surface properties are also evaluated for determining the dimensions of the surfaces, see Aufmaßermittlung Flächen [m²], Aufmaßermittlung Volumen [m³]
3D - Modeling
General
*The settings of the additional toolbar can be loaded from a set and saved to a set. For this purpose, the additional toolbar in the functions Wall, Wall opening, Beam and for entering rebar / meshes in the functions Individual, Standard and Laying field was expanded by two additional icons, see Einstellungen der Zusatzleiste laden / speichern.
*In the additional toolbars, the icon for selecting the material is abbreviated with the name of the material, see Material festlegen. The description of the name is displayed in the tooltip.
*In the Wall to Slab functions, the additional toolbar has been reduced by the unit. For the parameters, the unit now appears in the tooltip when you start up the input field.
 
Accessibility
*New key commands
The following key commands have been added for the setting sets of the additional toolbar, e.g. in the functions Wall, Wall opening and in the enter reinforcement for rebar / meshes function Individual:
 
 
[<]
[Shift] + [<]
Select setting
Save setting
 
Project Strukture
*If you want to insert or create an item in a project level that is not currently active, you will see a message that allows you to optionally automatically activate the project level and/or activate the display in the view box, see Sichtbarkeit in der Projektstruktur anpassen.
 
Cube - Functions
*After the insert of a 2D graphic (PDF, DWG/DXF), you can use the object data to view existing layers of the 2D graphic activate/deactivates, see function Graphic
*To create a straight stair, you can now have the disk thickness calculated automatically for the flight. The thickness is determined from the values for the Head with corbel type that you enter for the molded landing, see Automatische Berechnung Laufplattenstärke.
Project Model - General
Submodels
*You can now copy a selected submodel in the submodels configuration, see Teilmodelle / Ordner konfigurieren
*If a submodel is linked to another drawing, the name of the drawing is now displayed in the message when the function is called up for exclusive editing, see Selektiertes Teilmodell exklusiv bearbeiten
*You can now enter or change the Description and Folder data for a selected submodel that you are exclusively working on, see Daten des Teilmodells bearbeiten / Ordner umbenennen
*Unique color identification and new link symbol in the tree structure
A different color representation of the icons in the tree structure enters a unique state of the submodel, e.g. the submodel is being processed by another user. In addition, it enters a new status symbol to identify a linked submodel, see Kennzeichnung der Teilmodelle in der Baumstruktur.
Project Model - Cube - Views
Gerneral
*After a new Cube view has been created, it is automatically transferred directly to the exclusive processing, see function Create Cube View
*When you create a new Cube view, the most recently used scale is saved and is automatically entered in the data dialog for new Cube views, see the Maßstab option
*You can configure the Cube views to copy multiple selected Cube views within a folder or to another folder, see Mehrere selektierte Cube-Sichten kopieren
 
Objects
*Tab Objects expanded by the Reinforcement label group
In a Cube view, you can now create reinforcement labels for a selected Laying and Bending Shape. You can also copy a reinforcement and apply the labeling (Take Over) from the Cube view. Subsequently, you can use the Modification function to correct the marking and the bars to be displayed for the labeling of the selected laying. You can use the Settings to determine the global display of the reinforcement label in the project in the dialog.
 
Components
*Tab Components expanded to include the 3D-Einbauteile umpositionieren group
You can reposition individual or several main positions later, have item numbers of all embedded parts numbered without gaps, and adopt a changed item number (default) into the project.
 
Edit
*Tab Edit > group 2D objects expanded by the Update axis grid function
If the section box changes or the model is resized by an object, determine the time to update the axis grid, which means that the axis grid is not resized until it is updated.
 
View
*Using the View Box (Cube View / Cube) in the Cube views, you can select the view of the rebar during export in the drawing activate/deactivate in the Reinforcement category > Plan Presentation rebar option. Turning on this option switches the 3D display of the Cube reinforcement to a plan-oriented display. You can determine the appearance of the laying and bending shape rebar on the drawing.
Reinforcement - Cube / 3D
General
*Find and select the same bending shapes in the model
In the additional toolbar of the Selection mode, you can use the new Find identical objects function to find and select the identical bending shapes (rebar / meshes) for a selected bending shape in the model, see function Mode
 
Input Rebar
*Start and end distance of laying section determine above rod axis or outer edge
When splitting the laying, you can select the initial and final laying section distance from the bending shape Axis or the Outer edge of the bending shape, see function Achse / Außenkante
 
Edit General
*Tilt stirrup closure
You can pan stirrup closure of a selected laying, see function Stirrup Closure
*Edit the bending shape of a selected reinforcement position (rebar or mesh)
You can now remove, add, or resolve the points of reinforcement of a selected rebar position using the new Bending Shape function. Modify Through the of the bending shape, the positioning of the bending shape in the 3D view on the drawing remains unchanged.
 
3D / Cube Reinforcement Displays
*Apply the reinforcement label to the Cube reinforcement in a 3D view
When you export a 3D view with Cube reinforcement to the drawing, you can now automatically apply the labeling of a reinforcement to all the same reinforcements without any queries, see Übernahme Beschriftung option
*Positionstextlage der Cube-Bewehrung ändern
You can now quickly change the position of the item text of several identical reinforcements using the Move Individually Free function or via a Rebar/Meshes Single correction > Reinforcement text > Text position and switching on the option Übernahme Beschriftung in one step without having to approach each reinforcement individually, see Positionstextlage der Cube-Bewehrung ändern
 
Special Meshes
*You can redissolve a selected special mesh into individual transfers, see function Decompose
Reinforcement Schedules
*Reinforcement schedules installation: Meshes individually
A schedule of all meshes showing the bending shape can be placed on the drawing using the new Meshes schedule individually in the Reinforcement > Reinforcement schedules menu, see Meshes Individual
Output, Schedules and Interfaces
Publish
*Publish a general arrangement in the project model is now also possible, see Publish > CAD-Daten
 
IFC-Export
*For the export IFC, you can use the Settings > Project Settings menu to determine that only the layers switched on in the Cube project structure are submitted as information to IFC.
Semi Precast Part
Semi Precast Part Slab / Wall
*When displaying the crane position, you can now display the crane radii as partial circles via a section. If the crane location is outside the section, the location is also displayed and labeled. The export of the 3D view into the drawing now also shows the radii, see function Crane
*Main group determine
When entering a wall/slab, you can use the Settings to select various Main groups stored in the FT factory data.
 
Semi Precast Part Slab
*FILIGRAN® - feed in punching shear reinforcement
You can install FDB punching shear reinforcement from FILIGRAN Trägersysteme in slabs. The data exported from the design program are imported via an XML file, see function FDB
*In the case of an additional reinforcement that is laid over two elements, a confirmation of a possible faulty reinforcement can now be made during a reinforcement check, see function Reinforcment Check
*If the additional reinforcement of a slab is laid over several elements, the export according to Unitechnik divides the laying into the respective element, see function Work Preparation
*You can now mirror a ceiling element (including the embedded parts and lattice girders), see Deckenelementierung spiegeln
 
Semi Precast Part Wall
*Isowall: Adding grip points for top and bottom edges
For isowall, you can add handles to both shells at the top and bottom edges to add a paragraph to them. These can also be used for insulation and for the third reinforcement layer independently of the shells at the input line, see Elementierte / nicht elementierte Wand nachträglich ändern
*Select the input mode to enter the joint width between the wall elements
When entering a semi-finished wall, you can now accept the joint width from the factory settings or manually enter a joint width, see function Wall > Fuge aus Werkseinstellungen / Fuge manuell setzen
 
FT-Werk
*Double wall / isowall: Install side transport loops for any wall height
In addition to the previous option of installing lateral transport anchors, you can now use ID 110 to specify a value for the wall height from which the lateral transport loops are to be installed, see Seitliche Transportanker